Makita 18V Drill / Impact Holder with 18V Battery Holder | Wall Mounted Storage

Description

Makita 18V Drill & Impact Holder With Battery Storage | Wall Mounted Organiser

Keep your Makita 18V drill or impact driver and battery organised, visible and ready to use with this 3D printed wall mounted storage holder. Designed for workshops, garages, vans, sheds and tool storage areas, this combined organiser gives your tool body and spare battery their own dedicated storage positions.

The upper section supports a compatible Makita 18V drill, impact driver or similar tool body, while the lower section stores one compatible Makita 18V slide battery. This space saving layout helps keep your most frequently used tool and a spare battery together without using valuable bench, shelf or drawer space.

Key Features

• Combined wall mounted holder for a Makita 18V tool and battery
• Upper section stores a compatible drill, impact driver or similar tool body
• Lower section stores 1 Makita 18V slide battery
• Keeps the tool and spare battery together in one organised position
• Space saving vertical design makes use of unused wall space
• Helps reduce loose tools and batteries on benches, shelves and floors
• Supplied with 4 screws and 4 wall plugs
• Suitable for workshops, garages, sheds, vans and tool rooms
• Useful for tradespeople, technicians and DIY users
• Available in multiple colours
• 3D printed and made to order

Product Size

Approximate overall dimensions:

• Width: 136.4mm
• Depth: 112mm
• Height: 91.8mm

Please check these dimensions against your available mounting area and allow enough space around the holder to insert and remove your tool and battery safely.

Designed To Hold

• 1 x compatible Makita 18V drill, impact driver or similar tool body
• 1 x compatible Makita 18V slide battery

The tool is stored without the battery fitted. The spare battery is held separately in the lower section of the organiser.

Please check your exact tool and battery models before ordering. Compatibility may vary depending on the tool body, battery casing, belt clip position, accessories and manufacturing tolerances.

Combined Tool And Battery Storage

This holder provides a practical way to keep a Makita cordless tool and its power source together. Instead of leaving your drill or impact driver loose on a bench and storing the battery elsewhere, both can be kept in one organised wall mounted setup.

• Dedicated upper storage position for the tool body
• Separate lower storage position for one battery
• Makes tools and batteries easier to locate
• Helps improve workshop and van organisation
• Keeps frequently used equipment visible and accessible

Wall Mounted Organisation

Power tools and batteries can take up a significant amount of space when stored on benches or shelves. This holder uses vertical wall space to create a cleaner and more efficient storage layout.

• Helps free up workbench and shelf space
• Reduces loose tools and batteries around the workshop
• Keeps equipment off floors and work surfaces
• Creates a cleaner and more professional storage setup
• Useful for arranging several tool holders side by side

Installation Information

The holder should be mounted securely to a suitable wall, timber panel, van lining, tool board or other solid surface. It is supplied with 4 screws and 4 wall plugs for installation.

• Choose a strong and suitable mounting surface
• Install the holder level and securely
• Use fixings rated for the combined weight of the holder, tool and battery
• Leave sufficient clearance above, below and around the holder
• Check the holder and fixings regularly for movement or damage

Please note: the supplied screws and wall plugs may not be suitable for every mounting surface. Different wall types, van linings and storage panels may require stronger or different fixings. Check the mounting surface and use suitable hardware where required.

Battery Compatibility

• Battery platform: Makita 18V
• Battery style: compatible slide type battery
• Capacity: holds 1 battery

Genuine and third party compatible batteries may have slightly different casing dimensions. Please check your battery before ordering and do not force an unsuitable battery into the holder.

Tool Compatibility

The upper section is intended for compatible Makita drills, impact drivers and similar cordless tool bodies. Tool dimensions vary between models, so compatibility cannot be guaranteed with every Makita 18V tool.

Fit may also be affected by:

• Tool model and generation
• Tool body width and base shape
• Belt clips or accessory hooks
• Aftermarket modifications
• Manufacturing tolerances

Suitable For

• Makita 18V drill storage
• Makita 18V impact driver storage
• Makita 18V battery storage
• Workshop wall organisation
• Garage and shed storage
• Van and mobile workshop organisation
• Tool rooms and storage panels
• Tradespeople using Makita cordless tools
• DIY users and home workshops

Benefits Of Using This Holder

• Better organisation: keeps your tool and spare battery together
• Faster access: makes equipment easier to locate and remove
• Space saving: uses wall space instead of benches and shelves
• Separate storage: gives the tool and battery their own positions
• Cleaner workshop: reduces loose tools and battery clutter
• Fixings included: supplied with 4 screws and 4 wall plugs
• Practical layout: suitable for garages, vans and professional workshops
• Multiple colours: choose a colour to suit your storage setup

What’s Included

• 1 x Makita 18V drill or impact driver and battery wall holder in your selected colour
• 4 x screws
• 4 x wall plugs

Made To Order

This item is 3D printed and made to order.

Small layer lines, slight surface marks, minor texture differences or colour shade variations may be visible due to the 3D printing process. These are normal characteristics of 3D printed products and do not affect normal use.

Colour Options

The holder will be supplied in the colour selected from the variation menu.

Colours may appear slightly different in person due to lighting, screen settings and filament batches.

Custom Colours And Custom Prints

If you would like a different colour, custom size or another item 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom power tool holders, battery mounts, wall organisers, toolbox inserts and workshop storage accessories.

Order Yours Today

Make better use of your wall space with a Makita 18V drill or impact driver and battery holder, designed to keep your tool and spare battery organised, visible and ready to use.

Design Attribution & Licence

This product is a 3D print based on “Makita Wall Mounts / Holders for Battery and Tools (18V/14.4V LXT)” by GunSmoker on THINGIVERSE.

Licensed under Creative Commons Attribution 4.0 International.

Changes: Combined tool and battery holder configuration with technical preparation required for 3D printing.

Printed and sold independently by Layered Works. The original designer does not endorse or sponsor this product.

Available colours: Black, Dark Blue, Light Blue, Green, Grey, Orange, Purple, Red, White, Yellow.

Please note

This listing includes the holder, 4 screws and 4 wall plugs.

3D-printed holder only; photographed equipment is not included. Supplied parts are listed above.

Use a sound surface and fixings suitable for the loaded weight. Check for hidden services before drilling; avoid mounting above people or valuables. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by Makita. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.