Makita 18V Battery Wall Mount Holder | Multiple Colours | Battery Organiser

Description

Makita 18V Battery Wall Mount Holder | Multiple Colours | Battery Organiser

Keep your Makita 18V battery organised, secure and easy to access with this 3D printed wall mounted battery holder. Designed for workshops, garages, sheds, vans and tool storage areas, this compact mount gives your battery a dedicated storage position while helping free up shelves, workbenches and drawer space.

The battery slides into the holder and locks into position using its existing release mechanism. To remove the battery, simply press the battery release button as you would when removing it from a compatible Makita power tool.

Key Features

• Designed for compatible Makita 18V slide batteries
• Wall mounted design for workshops, garages, sheds and vans
• Battery locks securely into the holder
• Battery release button must be pressed before removal
• Helps prevent the battery sliding or falling out during normal storage
• Stores one battery in a compact wall mounted position
• Helps free up workbench, shelf and drawer space
• Supplied with 3 screws and 3 wall plugs
• Available in multiple colours
• 3D printed and made to order

Product Size

Approximate dimensions:

• Length: 98.4mm
• Width: 72.7mm
• Height: 21.8mm

Please compare these dimensions with your available mounting area before ordering. Leave sufficient space around the holder to insert the battery and operate its release button safely.

Locking Battery Design

This holder uses the battery’s existing slide rail and locking system. When a compatible battery is pushed fully into the mount, it locks into place in a similar way to fitting the battery onto a Makita power tool.

• Slide the battery fully onto the holder
• Check that the battery has locked securely into position
• Press the battery release button before attempting removal
• Slide the battery carefully away from the mount

Do not pull or force the battery out without pressing its release button. Doing so may damage the battery casing, locking mechanism or 3D printed holder.

Battery Compatibility

• Battery platform: Makita 18V
• Battery style: compatible slide type batteries
• Capacity: holds 1 battery
• Mounting position: wall, panel, tool board, van lining or suitable solid surface

Please check your exact battery model before ordering. Genuine batteries, older battery versions and third party compatible batteries may have different casing dimensions, rail designs or locking mechanisms.

Fit cannot be guaranteed for every third party or aftermarket battery. Do not force an incompatible battery onto the holder.

Wall Mounted Battery Storage

Makita batteries can quickly take up valuable space when stored loose on workbenches, shelves or inside drawers. This wall mounted holder helps you make better use of vertical storage space while keeping your batteries visible and ready to use.

• Helps reduce loose battery clutter
• Keeps batteries visible and easy to locate
• Makes use of otherwise unused wall space
• Allows multiple holders to be installed side by side
• Suitable for building an organised battery storage area

Installation Information

The holder includes mounting positions and is supplied with 3 screws and 3 wall plugs.

• Choose a strong and suitable mounting surface
• Position the holder so the battery can be inserted and removed easily
• Install the holder level and securely
• Use all appropriate mounting points
• Check that the battery locks securely before regular use
• Inspect the holder and fixings regularly for movement or damage

Please note: the supplied screws and wall plugs may not be suitable for every wall or mounting surface. Timber, masonry, plasterboard, van lining and storage panels may require different fixings. Check the mounting surface and use suitable replacement hardware where required.

Suitable For

• Makita 18V battery storage
• Workshop wall organisation
• Garage and shed storage
• Van and mobile workshop organisation
• Tool boards and storage panels
• Battery charging and storage areas
• Tradespeople using Makita cordless tools
• Electricians, builders, plumbers, joiners and installers
• DIY users and home workshops

Benefits Of Using This Holder

• Secure storage: compatible batteries lock into the holder
• Controlled removal: the battery release button must be pressed
• Better organisation: gives each battery a dedicated storage position
• Faster access: keeps batteries visible and ready to use
• Space saving: uses wall space instead of shelves and drawers
• Expandable setup: multiple holders can be positioned together
• Fixings included: supplied with 3 screws and 3 wall plugs
• Multiple colours: choose a colour to suit your storage setup

What’s Included

• 1 x Makita 18V battery wall mount holder in your selected colour
• 3 x screws
• 3 x wall plugs

Made To Order

This item is 3D printed and made to order.

Small layer lines, slight surface marks, minor texture differences or colour shade variations may be visible due to the 3D printing process. These are normal characteristics of 3D printed products and do not affect normal use.

Colour Options

The holder will be supplied in the colour selected from the variation menu.

Colours may appear slightly different in person due to lighting, screen settings and filament batches.

Custom Colours And Custom Prints

If you would like a different colour, custom mounting layout or another item 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom battery mounts, power tool holders, wall organisers, toolbox inserts and workshop storage accessories.

Order Yours Today

Make better use of your workshop or van storage with a Makita 18V battery wall mount holder, featuring a secure locking fit and supplied mounting hardware.

Design Attribution & Licence

This product is a 3D print based on “Makita Wall Mounts / Holders for Battery and Tools (18V/14.4V LXT)” by GunSmoker on THINGIVERSE.

Licensed under Creative Commons Attribution 4.0 International.

Changes: Battery holder configuration with technical preparation required for 3D printing.

Printed and sold independently by Layered Works. The original designer does not endorse or sponsor this product.

Available colours: Black, Dark Blue, Light Blue, Green, Grey, Orange, Purple, Red, White, Yellow.

Please note

This holder is designed for compatible Makita 18V slide batteries. This listing includes the holder, 3 screws and 3 wall plugs.

3D-printed holder only; photographed equipment is not included. Supplied parts are listed above.

Use a sound surface and fixings suitable for the loaded weight. Check for hidden services before drilling; avoid mounting above people or valuables. Never cover or store damaged, swollen, leaking or excessively hot batteries. Keep them away from water, flames and excessive heat; follow the manufacturer’s instructions. Confirm the battery is locked before releasing it; press its release button before removal. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by Makita. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.