Description
Makita 18V 3.0Ah Magnetic Battery Holder & Cover | Multiple Colours | Plastic Battery Organiser
Keep your Makita 18V 3.0Ah battery organised, protected and easier to store with this 3D printed battery holder and cover. Designed to fit around the lower section of a compatible Makita 18V 3.0Ah battery, it provides a stable storage base for toolbox drawers, steel tool chests, workbenches, shelves, vans and workshops.
The holder is available in 3 versions: without magnets, with 2 magnets or with 4 magnets. The magnetic versions use powerful 32x8mm magnets, each with a rated pulling force of up to 32kg under ideal conditions.
Although the magnetic versions may be capable of holding a compatible battery sideways on a suitable steel surface, this product is primarily designed for use inside steel toolbox drawers and tool chests. The magnets help keep the battery securely positioned and reduce movement when drawers are opened and closed.
The design provides a tight friction fit, so screws are not normally required during general storage use. Screw holes are included for users who wish to create a more permanent attachment using their own suitable longer screws.
Key Features
- Designed for compatible Makita 18V 3.0Ah batteries
- Functions as a battery holder, storage base and lower battery cover
- Available with no magnets, 2 magnets or 4 magnets
- Magnetic versions use powerful 32x8mm magnets
- Each magnet has a rated pulling force of up to 32kg under ideal conditions
- Designed primarily for keeping batteries secure inside steel toolbox drawers
- Magnetic versions help reduce movement on suitable flat steel surfaces
- Tight friction fit means screws are not normally needed for general storage
- Integrated screw holes allow optional permanent fitting
- Helps reduce batteries moving around loose in toolbox drawers
- Suitable for toolboxes, steel tool chests, shelves, workbenches, vans and workshops
- Compact design keeps the battery visible and easy to access
- Available in multiple colours
- 3D printed and made to order
Available Options
Option 1: No Magnets
- Supplied without magnets
- Uses the tight friction fit to sit around the battery base
- Suitable for shelves, drawers, workbenches and general battery storage
- Approximate dimensions: 121mm long x 79.3mm wide x 40mm high
Option 2: 2 Magnets
- Includes 2 x 32x8mm magnets fitted into the holder
- Each magnet has a rated pulling force of up to 32kg under ideal conditions
- Provides magnetic positioning on compatible flat steel surfaces
- Designed primarily for steel toolbox drawer and tool chest storage
- Approximate dimensions: 121mm long x 79.3mm wide x 39.3mm high
Option 3: 4 Magnets
- Includes 4 x 32x8mm magnets fitted into the holder
- Each magnet has a rated pulling force of up to 32kg under ideal conditions
- Provides additional magnetic contact compared with the 2 magnet version
- Designed primarily for steel toolbox drawer and tool chest storage
- Approximate dimensions: 121mm long x 79.3mm wide x 39.3mm high
Please select the correct version from the variation menu before purchasing.
Tight Friction Fit
The holder has been designed to fit closely around the lower section of the battery. This tight fit helps keep the holder attached during normal storage without requiring screws.
- Push the battery carefully into the holder
- Make sure the battery sits evenly inside the cover
- Do not force the battery if it does not align correctly
- Remove the holder carefully without twisting or pulling excessively
Fit may vary slightly due to battery age, casing wear, third party battery dimensions and manufacturing tolerances.
Optional Screw Fitting
The holder includes screw holes for users who want to secure it more permanently to the battery. This is optional, as the tight fit has been designed to hold the cover in position during normal storage use.
- Screws are not included
- You will need to source suitable longer screws if permanent fitting is required
- Check the required screw length and thread before installation
- Do not use screws that are too long
- Do not overtighten the screws
- Make sure the battery casing and screw positions are suitable before fitting
Removing, replacing or adding screws to a battery casing may affect the manufacturer’s warranty. Please check the manufacturer’s warranty terms before installation.
Always use the correct screw type and length for your exact battery. Incorrect screws, excessive tightening or unsuitable installation may damage the battery casing or mounting points.
Magnet Details
- Magnet size: 32x8mm
- Rated pulling force: up to 32kg per magnet under ideal conditions
- Available configurations: 2 magnets or 4 magnets
- Magnets are fitted into the base of the holder
- Designed to help keep the battery positioned inside suitable steel toolbox drawers
- The 4 magnet option provides more magnetic contact than the 2 magnet option
The stated pull force is the magnet manufacturer’s rating under ideal direct contact conditions. Actual magnetic performance will depend on the steel thickness, surface condition, paint, coatings, drawer liners, contact area, orientation and any gap between the magnet and the steel.
Designed For Toolbox Drawers
The magnetic versions are designed primarily for use inside steel toolbox drawers, tool chests and other suitable flat steel storage areas. The magnets help keep the battery in a dedicated position and reduce movement when the drawer is opened or closed.
- Helps stop batteries sliding around loose in steel drawers
- Keeps batteries separated from other tools and accessories
- Makes batteries easier to find and access
- Helps create a cleaner and more organised toolbox layout
- Suitable for positioning batteries on clean, flat steel surfaces
Although the holder may support a compatible battery sideways on a suitable steel surface, this is not its primary intended use. Surface strength, orientation and working conditions can significantly affect magnetic hold.
For regular use, place the holder in a stable drawer or flat storage area where the battery cannot fall and cause injury or damage.
Magnetic Storage Information
- Best performance is achieved on clean, flat steel surfaces
- Magnetic hold may be reduced by drawer liners, paint, dirt or uneven surfaces
- Magnets will not attach to plastic, aluminium, wood or non magnetic materials
- Thin steel may provide less magnetic hold than thicker steel
- Sideways magnetic hold will vary depending on the surface and battery condition
- Always test the holder carefully before regular use
Important: do not use the holder to suspend a battery overhead, upside down or in any location where it could fall onto a person, vehicle, tool or valuable surface.
Battery Compatibility
- Battery platform: Makita 18V
- Battery capacity: designed around the Makita 18V 3.0Ah battery
- Holder type: fitted lower cover and storage base
- Storage options: non magnetic, 2 magnet or 4 magnet
Please check your exact battery model before ordering. This holder is designed around the battery style shown in the product photographs and may not fit other capacities or differently shaped Makita batteries.
Genuine, older and third party compatible batteries may have different casing dimensions. Compatibility with batteries other than the intended Makita 18V 3.0Ah style cannot be guaranteed.
Suitable For
- Makita 18V 3.0Ah battery storage
- Toolbox drawer organisation
- Steel tool chest storage
- Workshop battery organisation
- Garage and shed storage
- Van and mobile tool setups
- Workbench and shelf storage
- Tradespeople using Makita cordless tools
- DIY users and home workshops
Benefits Of Using This Holder
- Better organisation: gives your battery a dedicated storage position
- Tight fit: designed to stay attached without screws during normal storage
- Choice of versions: select no magnets, 2 magnets or 4 magnets
- Powerful magnets: magnetic options use 32x8mm magnets rated up to 32kg each
- Drawer security: helps reduce battery movement inside steel tool drawers
- Optional permanent fitting: screw holes are included if required
- Cleaner toolbox: helps prevent batteries moving around loose
- Multiple colours: choose a colour to suit your storage setup
What’s Included
- 1 x Makita 18V 3.0Ah battery holder and cover in your selected colour
- 32x8mm magnets fitted according to your selected option
Please note: battery, tool, charger, screws, toolbox and accessories are not included. Any photographs showing batteries or tools are for display and compatibility examples only.
Important Battery Safety
- Inspect the battery before fitting the holder
- Do not use the holder with a cracked, swollen, leaking or damaged battery
- Do not cover damaged battery casing or ventilation areas
- Do not force an unsuitable battery into the holder
- Keep batteries away from water, open flames and excessive heat
- Do not leave batteries in prolonged direct sunlight
- Follow the battery manufacturer’s charging, storage and disposal instructions
- Do not position the battery where falling could cause injury or damage
- Do not rely on the magnet pull rating as a guaranteed safe working load
- Do not use the holder for overhead or suspended battery storage
- Stop using the holder if it becomes cracked, loose or damaged
- This product is a storage accessory and is not safety equipment
Made To Order
This item is 3D printed and made to order.
Small layer lines, slight surface marks, minor texture differences or colour shade variations may be visible due to the 3D printing process. These are normal characteristics of 3D printed products and do not affect normal use.
Colour Options
The holder will be supplied in the colour selected from the variation menu.
Colours may appear slightly different in person due to lighting, screen settings and filament batches.
Custom Colours And Custom Prints
If you would like a different colour, custom battery holder or another item 3D printed, please contact us before ordering.
Many of our products are created from customer requests, so we are happy to discuss custom battery covers, magnetic organisers, power tool holders, wall mounts, drawer inserts and workshop storage products.
Please Check Before Ordering
- Please confirm that you have a compatible Makita 18V 3.0Ah battery
- Please select the no magnet, 2 magnet or 4 magnet version
- The magnetic options use 32x8mm magnets
- Each magnet has a rated pulling force of up to 32kg under ideal conditions
- This listing is for the holder and selected magnets only
- Battery, tool, charger and screws are not included
- The holder provides a tight friction fit during normal storage
- Screw holes are included for optional permanent fitting
- Suitable longer screws must be sourced separately
- Check the screw thread and length before installation
- Do not use screws that could enter too deeply into the battery casing
- Removing or adding screws may affect the manufacturer’s warranty
- Fit may vary depending on battery age, casing condition and manufacturing tolerances
- Third party batteries may have different dimensions
- Magnetic performance depends on the surface used
- The rated magnet pull force is not a guaranteed safe working load
- Magnets will not attach to plastic, aluminium, wood or non magnetic surfaces
- The holder may support a compatible battery sideways on suitable steel, but it is designed primarily for use inside drawers
- Do not use the holder for overhead, upside down or unsafe suspended storage
- Do not use the holder if it becomes cracked, loose or damaged
- This product is designed as a storage organiser only
- Colours may vary slightly depending on screen settings and filament availability
- This item is not manufactured by, endorsed by or affiliated with Makita
As this item is made to order, please check battery compatibility, choose the correct magnet option and select the correct colour before purchasing.
Order Yours Today
Keep your Makita battery securely organised inside your toolbox with this Makita 18V 3.0Ah battery holder and cover, available without magnets or with a choice of 2 or 4 powerful 32x8mm magnets.
