Individual Magnetic Socket Holders

Description

Create a flexible socket layout one position at a time. Each compact magnetic base holds a single socket upright on a suitable steel toolbox drawer, cabinet or tray, making it easy to mix drive sizes and base diameters without wasting space.

Compatibility and fitment

Choose the drive size and base diameter that matches your socket: 1/4-inch (30 or 40 mm), 3/8-inch (30 or 40 mm), or 1/2-inch (30, 40 or 50 mm). Measure the space and socket before ordering.

What is included

One individual printed magnetic socket holder in the selected drive size, base diameter and colour. Socket and tools are not included.

How to choose

Select the socket drive first, then choose a base diameter that suits your socket and available drawer space. Orders are for one holder, allowing you to build a custom layout.

Finish and colour

Printed to order in a choice of eight colours. The selected colour applies to the printed holder; hardware and any items shown for demonstration retain their normal finish.

Available colours: Black, Dark Blue, Light Blue, Green, Orange, Purple, Red, White, Yellow.

Approximate dimensions

The 30mm, 40mm and 50mm options refer to the base diameter, not the holder height.

• 1/4-inch drive, 30mm base: 30mm diameter × 19mm high.
• 1/4-inch drive, 40mm base: 40mm diameter × 19mm high.
• 3/8-inch drive, 30mm base: 30mm diameter × 20mm high.
• 3/8-inch drive, 40mm base: 40mm diameter × 20mm high.
• 1/2-inch drive, 30mm base: 30mm diameter × 22.5mm high.
• 1/2-inch drive, 40mm base: 40mm diameter × 22.5mm high.
• 1/2-inch drive, 50mm base: 50mm diameter × 22mm high.

Magnets: 1 fitted magnet per holder, 12mm diameter × 3mm thick.

Please note

This is a made-to-order 3D-printed item. Fine layer lines, seam marks and small cosmetic variations are normal and do not affect its intended use.

3D-printed holder only; photographed equipment is not included. Supplied parts are listed above.

Use clean, flat steel; magnetic hold varies. Magnets are not load-rated fixings or transport restraints. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by the equipment brand. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.

Explore our full range of socket organisers for more toolbox storage options.