40-Socket Multi-Drive Portable Magnetic Socket Tray

Description

Carry and organise a mixed socket set on one magnetic tray. Forty dedicated square-drive posts keep three common drive sizes together, while four magnets help hold the organiser on a suitable steel surface.

Compatibility and fitment

Holds 40 sockets in total: 10 × 1/2-inch, 14 × 3/8-inch and 16 × 1/4-inch. Check the drive sizes before ordering; sockets are located by their drive square.

What is included

One printed 40-position tray and four 12 × 3 mm magnets. Sockets, adaptors, ratchets and tools are not included.

Approximate dimensions

Approximately 200 × 175 × 17.7 mm.

Magnetic use

For best performance, place the tray on a clean, flat ferrous-steel surface. Magnetic holding force varies with surface thickness, paint, dirt, orientation and load.

Finish and colour

Printed to order in a choice of nine colours. The selected colour applies to the printed holder; hardware and any items shown for demonstration retain their normal finish.

Available colours: Black, Dark Blue, Light Blue, Green, Grey, Orange, Purple, Red, White, Yellow.

Please note

This is a made-to-order 3D-printed item. Fine layer lines, seam marks and small cosmetic variations are normal and do not affect its intended use.

3D-printed tray only; photographed equipment is not included. Supplied parts are listed above.

Use clean, flat steel; magnetic hold varies. Magnets are not load-rated fixings or transport restraints. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by the equipment brand. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.