Wago 221 Connector Screw-Mount Holder

Description

Keep suitable connectors grouped with this screw-mount Wago 221 connector holder. Choose a layout for 3-port connectors, 5-port connectors or a combination, so the mount matches the arrangement you need.

Product details

• 11 layouts for suitable 3-port and 5-port Wago 221 connectors.
• Choose the number and combination of connector bodies in the dropdown.
• Black, white or grey.
• Access holes allow a connector to be released from below when safely disconnected.

Size and fit

Designed for the smaller 4mm²-family Wago 221 3-port / 5-port case shapes, commonly 221-413 and 221-415. Check the exact connector casing and selected layout. Other Wago families and larger 6mm² connectors are not assumed to fit.

• 1 × 3-port: 24.5 × 52.5 × 14.3mm.
• 1 × 5-port: 24.5 × 63.5 × 14.3mm.
• 2 × 3-port: 24.5 × 75 × 14.3mm.
• 2 × 5-port: 24.5 × 97 × 14.3mm.
• 3 × 3-port: 24.5 × 97.5 × 14.3mm.
• 3 × 5-port: 24.5 × 130.5 × 14.3mm.
• 4 × 3-port: 24.5 × 120 × 14.3mm.
• 4 × 5-port: 24.5 × 164 × 14.3mm.
• 1 × 3-port + 1 × 5-port: 24.5 × 86 × 14.3mm.
• 2 × 3-port + 2 × 5-port: 24.5 × 142 × 14.3mm.
• 3 × 3-port + 3 × 5-port: 24.5 × 198 × 14.3mm.

Dimensions are approximate overall model dimensions; orientation may differ when mounted. Allow for normal manufacturing variation.

What is included?

One selected mount, two screws and wall plugs. Wago connectors, cables, nuts and bolts are not included.

Unless listed above, tools and other demonstration items shown in the photographs are for illustration only and are not included.

Colour and finish

Made to order in your selected colour. This is a physical printed accessory, not a digital STL file. Visible layer lines, small surface variations and minor marks from support removal are normal characteristics of the printing process, not a moulded finish. Colour can vary slightly with filament batches, lighting and screen settings. Keep away from high heat and hot surfaces.

Before ordering

Please compare your exact item with the description, dimensions and photographs. Model names alone do not guarantee fit across every generation or version. Contact Layered Works if you are unsure before ordering.

Design credit

WAGO 221 Mount – 11 Variations by VC Design. Used under Creative Commons Attribution 4.0 International (CC BY 4.0). Printed by Layered Works in your selected colour.

Please note

3D-printed holder only; photographed equipment is not included. Supplied parts are listed above.

Mechanical organiser only: not an electrical connector, approved carrier, junction box, enclosure or insulation. Connector electrical and temperature ratings do not transfer to this holder. A competent person must use compliant equipment and any required enclosure; isolate power before fitting or releasing connectors.

Independent accessory; not made, approved or endorsed by Wago. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.