Makita 18V 5.0Ah Magnetic Battery Base

Description

Keep a compatible Makita 18V 5.0Ah battery visible and easy to reach on a suitable steel toolbox, cabinet or workshop panel. The printed base follows the battery casing and contains the selected number of strong magnets.

Compatibility and fitment

Designed for the Makita 18V 5.0Ah casing shown. It is not universal; compare your battery casing and underside with the photographs before ordering.

What is included

One printed magnetic battery base, four screws and either four or six 32 × 8 mm magnets, according to the selected option. Battery and tools are not included.

Approximate dimensions

Approximately 122.4 × 79.3 × 39.3 mm. Both magnet-count options use the same external footprint.

Magnet options

Choose four magnets for normal storage or six magnets for increased holding force on a clean, flat steel surface. Holding performance depends on the surface thickness, cleanliness, orientation and loading.

Finish and colour

Printed to order in a choice of nine colours. The selected colour applies to the printed holder; hardware and any items shown for demonstration retain their normal finish.

This is an aftermarket storage accessory. Manufacturer names are used only to identify compatibility; no affiliation or endorsement is implied.

Available colours: Black, Dark Blue, Light Blue, Green, Grey, Orange, Purple, Red, White, Yellow.

Please note

This is a made-to-order 3D-printed item. Fine layer lines, seam marks and small cosmetic variations are normal and do not affect its intended use.

3D-printed kit only; photographed equipment is not included. Supplied parts are listed above.

Use clean, flat steel; magnetic hold varies. Magnets are not load-rated fixings or transport restraints. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by the equipment brand. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.