Magnetic Air Tool Bit Holder

Description

Keep your attachments upright and easy to find with this magnetic air tool bit holder. The tray separates larger air hammer chisels from grinding stones and small rotary accessories, so you can see what you need without searching through loose bits.

Product details

• 16 holes measuring 10.5mm for 10.2mm / .401-inch air hammer chisel shanks.
• 16 holes measuring 6mm for suitable grinding stones and rotary burrs.
• 15 holes measuring 3.2mm for 3mm and 1/8-inch (3.175mm) accessory shanks.
• Four 12 × 3mm magnets supplied for use on suitable steel surfaces.

Size and fit

Hole sizes describe the organiser openings, not a guaranteed fit for every accessory. Check your shank diameters and compare your attachments with the photographs.

• 203.2 × 127 × 25.4mm.

Dimensions are approximate overall model dimensions; orientation may differ when mounted. Allow for normal manufacturing variation.

What is included?

One organiser tray and four 12 × 3mm magnets.

Unless listed above, tools and other demonstration items shown in the photographs are for illustration only and are not included.

Colour and finish

Made to order in your selected colour. This is a physical printed accessory, not a digital STL file. Visible layer lines, small surface variations and minor marks from support removal are normal characteristics of the printing process, not a moulded finish. Colour can vary slightly with filament batches, lighting and screen settings. Keep away from high heat and hot surfaces.

Before ordering

Please compare your exact item with the description, dimensions and photographs. Model names alone do not guarantee fit across every generation or version. Contact Layered Works if you are unsure before ordering.

Available colours: Black, Dark Blue, Light Blue, Green, Grey, Orange, Purple, Red, White, Yellow.

Please note

3D-printed holder only; photographed equipment is not included. Supplied parts are listed above.

Use clean, flat steel; magnetic hold varies. Magnets are not load-rated fixings or transport restraints. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by the equipment brand. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.