Makita tool Bit Holder | Fits Multiple Models | Multiple Colours | Bit Organiser

Description

Makita Tool Bit Holder | Left & Right Pair | Fits Multiple Models | Multiple Colours

Keep your most frequently used screwdriver and drill bits organised and ready to use with this Makita tool mounted bit holder set. Designed to attach directly to compatible Makita cordless tools, the holders provide convenient onboard bit storage without needing to search through a toolbox, case or pocket.

Each set includes 2 holders: one holder for the left side of the tool and one for the right side. The handed design follows the shape of the tool body for a cleaner fit and allows bits to be stored on both sides.

Key Features

• Designed for compatible Makita cordless drills and impact drivers
• Includes 1 left holder and 1 right holder
• Provides convenient onboard storage for commonly used bits
• Attaches using the existing accessory screw positions on the tool
• Uses the original Makita screws where available
• Replacement screws can be purchased separately if required
• Compact design follows the side of the tool body
• Helps reduce loose bits in pockets, cases and toolboxes
• Suitable for professional tradespeople, technicians and DIY users
• Available in multiple colours
• 3D printed and made to order

What You Receive

• 1 x left side Makita bit holder
• 1 x right side Makita bit holder

The holders are handed components. The left holder is designed for the left side of the tool and the right holder is designed for the right side.

Product Size

Approximate dimensions per holder:

• Length: 68.5mm
• Width: 13.5mm
• Height: 14.4mm

Dimensions are approximate and may vary slightly due to the 3D printing process.

Tested Tool Compatibility

This bit holder set has been tested with the following Makita models:

• Makita DTD154 impact driver
• Makita DDF484 drill driver
• Makita DHP482 combi drill
• Makita DTD152 impact driver

It may also fit other Makita tools that use the same or a very similar tool body, side profile and accessory screw arrangement.

Please note: compatibility with models not listed above cannot be guaranteed. Please compare your tool body, mounting points and available side clearance with the product photographs before ordering.

Screw And Installation Information

Screws are not included. The holders are designed to use the original Makita accessory screws already fitted to your tool, where available.

• Remove the appropriate original screw from the side of the tool
• Position the correct left or right holder over the mounting point
• Refit and tighten the original screw carefully
• Check that the holder is secure before inserting bits

If your tool does not have the required screw, or the original screw is missing, a replacement can be purchased using:

• Makita replacement screw code: Makita 251314-2
• Alternative screw size: M5x10mm

Please confirm the thread and screw compatibility with your exact tool before purchasing or fitting a replacement screw. Do not force an incorrect screw into the tool body.

Onboard Bit Storage

Small driver bits are easy to misplace when moving between jobs. These holders provide a dedicated storage position directly on the tool, helping keep commonly used bits nearby and ready to swap.

• Reduces time spent searching for loose bits
• Keeps commonly used bits attached to the tool
• Useful when working from ladders, vans or mobile setups
• Helps reduce loose bits inside tool cases and bags
• Provides storage on both sides of the tool

Suitable For

• Screwdriver bit storage
• Driver bit organisation
• Makita drill accessories
• Makita impact driver accessories
• Workshop and garage use
• Van and mobile tool setups
• Construction and site work
• Electricians, builders, joiners and installers
• DIY users and home workshops

Benefits Of Using These Holders

• Two holders included: one for each side of the tool
• Faster access: keeps commonly used bits close to hand
• Compact design: fits closely against the tool body
• Uses existing mounting points: no drilling into the tool is required
• Cleaner storage: helps reduce loose bits in cases and bags
• Multiple colours: choose a colour to suit your tool setup

What’s Included

• 1 x left side bit holder
• 1 x right side bit holder

Made To Order

This item is 3D printed and made to order.

Small layer lines, slight surface marks, minor texture differences or colour shade variations may be visible due to the 3D printing process. These are normal characteristics of 3D printed products and do not affect normal use.

Colour Options

The holder set will be supplied in the colour selected from the variation menu.

Colours may appear slightly different in person due to lighting, screen settings and filament batches.

Custom Colours And Custom Prints

If you would like a different colour, custom tool accessory or another item 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom bit holders, power tool accessories, battery mounts, wall organisers and workshop storage products.

Order Yours Today

Keep your commonly used bits attached to your tool and ready for work with this Makita left and right bit holder set.

Design Attribution & Licence

Design by Cmarlow on PRINTABLES.

Licensed under Creative Commons Attribution 4.0 International.

Changes: None, except technical preparation required for 3D printing.

Printed and sold independently by Layered Works. The original designer does not endorse or sponsor this product.

Available colours: Black, Dark Blue, Light Blue, Green, Grey, Orange, Red, White, Yellow.

Please note

This listing includes 1 left holder and 1 right holder. A Makita 251314-2 or compatible M5x10mm screw may be suitable if a replacement is required. Confirmed models include DTD154, DDF484, DHP482 and DTD152.

3D-printed holder only; photographed equipment is not included. Supplied parts are listed above.

Changes to original screws may affect the equipment warranty; check the manufacturer’s terms before fitting. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by Makita. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.