Makita 18V 3.0ah Magnetic Battery Holder/Cover | TPU/Rubber | Multiple Colours

Description

Makita 18V 3.0Ah Magnetic TPU Battery Holder & Cover | Multiple Colours

Keep your Makita 18V 3.0Ah battery organised, protected and easier to store with this 3D printed flexible TPU battery holder and cover. Designed to fit around the lower section of a compatible Makita 18V 3.0Ah battery, it provides a practical storage base for toolbox drawers, steel tool chests, workbenches, shelves, vans and workshops.

Unlike the rigid plastic version, this holder is printed from TPU flexible material. TPU provides a softer, rubber-like finish that can help protect the lower section of the battery from everyday knocks, scrapes and contact with hard workshop surfaces.

The holder is available in 3 versions: without magnets, with 2 magnets or with 4 magnets. The magnetic versions use powerful 32x8mm magnets, each with a rated pulling force of up to 32kg under ideal conditions.

The magnetic versions are designed for upright battery storage inside steel toolbox drawers and tool chests or on flat, horizontal steel surfaces. The magnets help keep the battery securely positioned and reduce movement when drawers are opened and closed.

Key Features

• Designed for compatible Makita 18V 3.0Ah batteries
• Printed from flexible and durable TPU material
• Rubber-like construction provides a softer protective outer surface
• Functions as a battery holder, storage base and lower battery cover
• Helps protect the battery base from everyday knocks, scratches and workshop surfaces
• Available with no magnets, 2 magnets or 4 magnets
• Magnetic versions use powerful 32x8mm magnets
• Each magnet has a rated pulling force of up to 32kg under ideal conditions
• Designed primarily for keeping batteries secure inside steel toolbox drawers
• Magnetic versions help reduce movement on suitable flat steel surfaces
• Suitable for toolboxes, steel tool chests, shelves, workbenches, vans and workshops
• Available in multiple colours
• 3D printed and made to order

Available Options

Option 1: No Magnets

• Supplied without magnets
• Uses the close TPU friction fit to sit around the battery base
• Suitable for shelves, drawers, workbenches and general battery storage
• Provides a flexible protective cover for the lower section of the battery

Option 2: 2 Magnets

• Includes 2 x 32x8mm magnets fitted into the holder
• Each magnet has a rated pulling force of up to 32kg under ideal conditions
• Provides magnetic positioning on compatible flat steel surfaces
• Designed primarily for steel toolbox drawer and tool chest storage

Option 3: 4 Magnets

• Includes 4 x 32x8mm magnets fitted into the holder
• Each magnet has a rated pulling force of up to 32kg under ideal conditions
• Provides additional magnetic contact compared with the 2 magnet version
• Designed primarily for steel toolbox drawer and tool chest storage

Please select the correct version from the variation menu before purchasing. Fit may vary slightly due to battery age, casing wear, third party battery dimensions and manufacturing tolerances.

Magnet Details

• Magnet size: 32x8mm
• Rated pulling force: up to 32kg per magnet under ideal conditions
• Available configurations: 2 magnets or 4 magnets
• Magnets are fitted into the base of the TPU holder
• Designed to help keep the battery positioned inside suitable steel toolbox drawers
• The 4 magnet option provides more magnetic contact than the 2 magnet option

The stated pull force is the magnet manufacturer’s rating under ideal direct contact conditions. It is not the guaranteed holding force of the finished product. Actual performance will depend on steel thickness, surface condition, paint, coatings, drawer liners, contact area, orientation and any gap between the magnets and the steel.

Designed For Toolbox Drawers

The magnetic versions are designed primarily for use inside steel toolbox drawers, tool chests and other suitable flat steel storage areas. The magnets help keep the battery in a dedicated position and reduce movement when the drawer is opened or closed.

• Helps stop batteries sliding around loose in steel drawers
• Keeps batteries separated from other tools and accessories
• Makes batteries easier to find and access
• Helps create a cleaner and more organised toolbox layout
• Suitable for positioning batteries on clean, flat steel surfaces

Do not use this holder to support a battery sideways or suspended. The product is designed mainly to keep the battery secure inside drawers and stable storage areas.

For regular use, place the holder in a stable drawer or flat storage area where the battery cannot fall and cause injury or damage.

Magnetic Storage Information

• Best performance is achieved on clean, flat steel surfaces
• Magnetic hold may be reduced by drawer liners, paint, dirt or uneven surfaces
• Magnets will not attach to plastic, aluminium, wood or non magnetic materials
• Thin steel may provide less magnetic hold than thicker steel
• Do not use for sideways or suspended storage
• Always test the holder carefully before regular use

Important: do not use the holder to suspend a battery overhead, upside down or in any location where it could fall onto a person, vehicle, tool or valuable surface.

Battery Compatibility

• Battery platform: Makita 18V
• Battery capacity: designed around the Makita 18V 3.0Ah battery
• Material: flexible TPU
• Holder type: fitted lower cover and storage base
• Storage options: non magnetic, 2 magnet or 4 magnet

Please check your exact battery model before ordering. This holder is designed around the battery style shown in the product photographs and may not fit other capacities or differently shaped Makita batteries.

Benefits Of Using This Holder

• Flexible protection: TPU provides a softer, rubber-like cover around the battery base
• Better organisation: gives your battery a dedicated storage position
• Close fit: designed to stay attached without screws during normal storage
• Choice of versions: select no magnets, 2 magnets or 4 magnets
• Powerful magnets: magnetic options use 32x8mm magnets rated up to 32kg each
• Drawer security: helps reduce battery movement inside steel tool drawers
• Multiple colours: choose a colour to suit your storage setup

What’s Included

• 1 x Makita 18V 3.0Ah TPU battery holder and cover in your selected colour
• 32x8mm magnets fitted according to your selected option

Made To Order

This item is 3D printed from TPU and made to order.

Small layer lines, slight surface marks, minor texture differences or colour shade variations may be visible due to the 3D printing process. Flexible TPU prints may also show minor stringing or surface texture. These are normal characteristics of 3D printed TPU products and do not affect normal use.

Colour Options

The holder will be supplied in the colour selected from the variation menu.

Colours may appear slightly different in person due to lighting, screen settings and filament batches.

Custom Colours And Custom Prints

If you would like a different colour, custom battery holder or another item 3D printed, please contact us before ordering.

Many of our products are created from customer requests, so we are happy to discuss custom TPU battery covers, magnetic organisers, power tool holders, wall mounts, drawer inserts and workshop storage products.

Order Yours Today

Protect and organise your Makita battery with this flexible TPU Makita 18V 3.0Ah battery holder and cover, available without magnets or with a choice of 2 or 4 powerful 32x8mm magnets.

Available colours: Black, Dark Blue, Green, Grey, Red, White.

Approximate dimensions

Approximate maximum overall size: 127mm long × 87mm wide × 41mm high.

Please note

Please confirm that you have a compatible Makita 18V 3.0Ah battery. Please select the no magnet, 2 magnet or 4 magnet version. The magnetic options use 32x8mm magnets.

3D-printed holder only; photographed equipment is not included. Supplied parts are listed above.

Store batteries upright on a stable, level surface, removed from tools. Magnetic versions require horizontal steel; do not suspend batteries or support an attached tool. Use clean, flat steel; magnetic hold varies. Magnets are not load-rated fixings or transport restraints. This accessory does not make a battery waterproof or impact proof. Never cover or store damaged, swollen, leaking or excessively hot batteries. Keep them away from water, flames and excessive heat; follow the manufacturer’s instructions. Keep battery ventilation areas clear. Inspect before use; stop if damaged, loose or unstable.

Independent accessory; not made, approved or endorsed by Makita. Check compatibility before ordering; do not force a fit or overload. Your statutory rights are unaffected.